|
| |
|
 |
|
 |
 |
 |
 |
|
|
C4S Tube Cleaner |
The C4S tube cleaner is an all purpose tube cleaner for condensers and heat exchangers with tube sizes 1/2" – 1-1/4". This metal cleaner is effective on all types of deposits, including micro/macro fouling, organic type scales, corrosion and pitting by-products, and all types of obstructions. It can also be used with thin wall metal inserts and coatings on tubesheets or inlet ends.
|
 |
 |
Features:
- Safe, water powered tube cleaner
- Four metal-bladed center rivet design provides overlapping tube I.D. coverage
- Spring-loaded and designed to meet tube specifications
- Heads are color-coded to distinguish size and specially designed to control cleaner travel speed
- Can be used for approximately 8-12 shots each
|
|
C3S Tube Cleaner |
The C3S tube cleaner is a heavy duty tube cleaner for condensers and heat exchangers with tube sizes 7/8" and 1". Effective on all types of deposits, its reinforced construction makes it especially effective for the removal of hard deposits, corrosion and pitting by-products and all types of obstructions.
|
 |
|
Features:
- Safe, water powered tube cleaner
- Three metal-bladed reinforced construction provides
- Complete tube I.D. coverage
- Spring-loaded and designed to meet tube specifications
- Heads are color-coded to distinguish size and specially designed to control cleaner travel and speed
- Can be used for approximately 8-12 shots each
|
|
C2X and C3X "Hex" Tube Cleaners
|
These two (C2X) or three (C3X) hexagon bladed tube cleaners provide six contact points per blade. They are available in 3/4", 7/8", 1", and 1-1/8" sizes. These tube cleaners are designed to remove thin tenacious deposits such as manganese, silica, iron and calcium and are also effective in removing corrosion product and other types of debris and obstructions.
|
 |
|
Features:
- Safe, water powered tube cleaner
- Metal hexagon blade design, available in two or three stages (blades), with six contact points per blade
- Spring-loaded, manufactured to tube specifications
- Heads are color coded to distinguish size and specially designed to control cleaner travel speed
- Can be used for 8-12 shots each
|
|
How Do Conco Tube Cleaners Work?
|
The spring-loaded Conco tube cleaners are shot through the tubes with the Conco Water Gun at 200-300 psi water pressure. The tube cleaner travels through the tube at 10 to 20 feet per second, plowing off deposits and corrosion and removing obstructions. Water flushes the removed matter out ahead of the cleaner, leaving a clean, polished bare metal inside diameter for optimum heat transfer efficiency.
|
The Conco Edge removes more deposits and leaves the smoothest surface in the industry, providing "Absolutely the Best" results. |
|
|
|
| | | |
